Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims. And, it comes with an O-ring seal to ensure a leak-free fit.
Serfas does it again with the innovative 2-In-1 Shock/Tire pump. Throw it in your pack for every ride and you have a dual-purpose pump that boasts a 300psi capacity. It uses a dual action motion to make it easy to pump in higher volumes or higher pressures. The aluminum construction makes it super durable. A large gauge is easy to read and the air-release button makes fine-tuning pressure in shocks and tires a breeze.
Serfas has the basics covered with the Combo Kit 1. It comes with dual valve mini pump, a 6-piece mini tool, a set of tire levers, an 8-piece tire patch kit, and a medium sized saddle bag to carry it all.
The best of both worlds are now combined into one. Three tire levers and a CO2 inflator head round out this combo tool. Features: - 1 Tire Lever With Built In CO2 Inflater - 2 Tire Levers With Built In Spoke Hooks - Presta & Scharder Valve Compatible Specs: - Number of Tools: 2 - Weight: 38 Grams - CO2 Lever Length: 5 1/4? - Lever Length: 4 1/2?
The ultimate starter combo kit! - Medium-sized saddle bag - Ballistic nylon bottle cage - 15 function super tool with CO2 inflator - Tire levers - 8-piece patch kit - 2 threaded 16g CO2 cartridges
A CO2 inflator and full-featured mini tool in one! Serfas' ST-17i features 2, 4, 5, 6 and 8mm Allen keys. It also has Phillips and flathead screwdrivers, T25 and T30 Torx wrenches, and 3.23, 3.3, 3.45, 3.96mm spoke wrenches. In addition, it boasts a 10mm open end wrench, a chain breaker and a CO2 inflator head (cartridges sold separately). With all that, this small tool's capabilities are hardly mini.
The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.
Easy to use, powerful, durable and economical, Park Tool's PFP-8 Home Mechanic's Floor Pump has a place in every garage and home bike shop and is perfect to take along to cycling events, too! It inflates like a champ thanks to its sturdy steel barrel, tough handle, composite thumblock head that fits Presta and Schrader valves, sturdy steel base, long hose and extra-large, easy-to-read gauge.
$84.99 - $89.99
Lezyne's Alloy Floor Drive Pump features a durable CNC-machined aluminum barrel and base. Varnished wood handle with aluminum junction and steel piston. Oversized 3.5-inch precision gauge. 220 psi max. Extra-long, high-strength hose with aluminum couplers. Tough anodized high-polish finish. - ABS2 equipped
Lezyne's Classic Floor Drive Pump features a machined aluminum base with a steel barrel and piston. Oversized 3.5 inch precision gauge. 220 psi max. Extra-long, high-strength hose with aluminum couplers. Premium paint finish with varnished wood handle. - ABS2 equipped.
Lezyne's Macro Floor Drive Pump is an outstanding value. It features a durable steel barrel and piston, along with an ergonomic, sleek composite matrix handle and base. - Effortless Inflation design - Precision gauge - Extra-long hose - Ultra-rigid construction doesn’t flex during use - Max pressure: 220psi / 15.1 bar
Lightweight plugs for tubeless tire punctures. When paired with Genuine Innovations' Tubeless Tackle Kit (#G20439) or Tubeless Repair Kit (#G2650), you can plug pesky punctures in seconds and cycle confident for many rides to come.
One tubeless bicycle tire tool to rule them all. Compact and versatile, this is the ultimate tubeless tire repair tool. Never get stuck on the side of the trail again! Self-contained tire repair kit includes: - 5 tubeless repair plugs - 2 Presta core valves - Integrated valve core removal tool - Small, strong plugger tool - Alloy weatherproof storage capsule
Want a super-easy way to fix a flat? If you have tubeless tires on your mountain bike, all you need is Genuine Innovations' Tubeless Tire Repair Kit. No interior repair is needed, so you don't have to remove the tire. Just plug the hole with the self-vulcanizing plugs, inflate and ride away. The kit includes an insertion tool and five rope plugs.
The “Holster” allows you to carry your GUP in style and have quick access to it when it’s needed the most. The long Velcro strap allows it to fit on most frames, seat posts and saddle rails, while the lightweight silicon block protects your frame and keeps your GUP securely fastened. Holster up!
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's Sonic Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The Sonic Nut is compatible with Xlab's Sonic and Turbo Wings.
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's X-Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The X-Nut is compatible with Xlab's Carbon and Super Wings.
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
- Solution for mounting pumps and C02 inflators on frames or seatpost - Soft rubber block and Velcro loops hold pumps tightly
The world’s first CO2 inflator with tire gauge provides tire-inflation and tire-pressure measurement. The angled head fits Presta and Schrader valves and a special feature allows the user to adjust the flow while filling the tire. Dual-end design allows for one-cartridge storage. - CO2 inflator that features a gauge as well - Flow is adjustable using special feature - Compatible with both Presta and Schrader valves - Presta/Schrader with integrated dust cap, Push to inflate - Gauge: Reads 160 psi / 11 bar, 1-1/2” analog - Engineering-grade polymer - Weight: 45g /1.59 oz - Size: 6.5 x 5.2 x 3.3 cm / 2.5” x 2” x 1.3” - Accepts threaded cartridges - CO2 cartridges sold separately
The Topeak JoeBlow III continues the tradition of setting the benchmark for floor pump durability and performance while ushering in upgrades with an enlarged 3-inch chronograph-inspired gauge and hammer-style TwinHead DX pump head. A durable steel barrel and base as well as an ergonomic padded handle make inflating tires a breeze. - Presta / Schrader / Dunlop-compatible - Max 160psi / 11bar - Volume per stroke: 317.5cc - 3.7lbs / 1.68kg - Ball and bladder needles included
Topeak's Mini Dual is constructed of lightweight aluminum and sports a grippy Kraton and plastic handle for easy pumping. And, the thumb-lock head ensures an airtight seal on both Presta and Schrader valves.
The Mountain TT G Twin Turbo pump has a large, integrated 1-1/8"-diameter easy-to-read analog gauge. It fills both large-volume fat bike tires and higher pressure MTB tires with ease. TwinTurbo technology uses both strokes to compress air to deliver high-pressure output and saves time and effort. Integrated dust cap keeps pump head clean and thumb-lock lever ensures an air-tight seal. - Head: Presta / Schrader / Dunlop with integrated dust cap - Barrel: Aluminum - Thumb Lock/Handle: Polymer - Capacity: 60psi / 4bar, 1-1/8” Analog - Volume Per Stroke: 91cc - Added Features: Side mount bracket - Size: 25.3 x 4.9 x 4cm / 10” x 1.9” x 1.6” - Weight: 227g / 8oz
Reach peak inflation pressure in a flash with Topeak's Peak DX II. Its butted-aluminum barrel and folding T-handle makes pumping up tires a snap! Plus, the thumb-lock SmartHead grips tight on both Presta and Schrader valves.
Topeak's Peakini II is a powerful mini pump that's ideal for road and trail use. It sports a reversible head so you can pump both your Schrader and Presta valves with ease. And, its highly efficient, single action design and T-handle mean you'll be back out riding after a flat quicker than ever.
Topeak's Pocket Rocket boasts an aluminum barrel for superb function, durability and max pump power, while its plastic handle ensures pumping comfort. And, its aluminum thumb-lock head fits both Presta and Schrader valves.
A precision fork and shock pump with an easy-to-read dial gauge for accurate pressure readings up to 360 psi / 24.8 bar. An air release button and Pressure-Rite connector makes setting proper pressure easy and eliminates air loss when disconnecting, while the flexible hose takes stress off the valve stem when pumping. - Head: Pressure-Rite shock valve - Guage: 360 psi / 24.8 bar, Analog - Handle: Dual density polymer - Dimensions: 21.5 x 4.5 x 4.3 cm / 8.5" x 1.8 x 1.7" - Volume per stroke: 11cc - Barrel: Aluminum - Pressure Tuning: Air release button - Features: Flexible rotating hose - Weight: 170 g / 5.98 oz
Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.
A Schrader valve adapter allows using the JoeBlow Ace floor pump for quickly pumping forks and rear shocks. Built-in air release knob allows fine tuning air pressure.
The most compact, lightweight Dual Action pump with gauge that road riders can fit anywhere. Large integrated 1-1/8" diameter easy-to-read analog gauge provides the perfect inflation every time. Dual-Action (DA) doubles volume with each stroke and inflates tires to 120psi / 8bar. Integrated dust cap keeps pump head clean and thumb-lock lever ensures an air-tight seal. - Head: Presta with integrated dust cap - Barrel/Thumb Lock: Aluminum - Handle: Polymer - Capacity: 120psi / 8bar, 1-1/8” Analog - Volume Per Stroke: 36 cc (pull + push) - Added Features: Dual action pumping head - Side mount bracket - Size: 21.8 x 3.4 x 3.1cm / 8.6” x 1.3” x 1.2” - Weight: 116g / 4.09oz
Page 1 of 7 Next page